Cables

- All cables are pre-stretched - Low-friction, slick surface cables for smooth braking action - Can be used for road and mountain bikes - Stainless steel kit is rust-proof

Kink's One Piece Cable system incorporates all the great features found in the DX linear cable and creates a simpler brake cable system requiring minimal setup. The three preset straddle cable lengths fit with all modern frames, and the remaining straddle cable length can easily be trimmed off. This single unit cable system greatly simplifies brake installation, reduces maintenance, and increases braking stiffness. Note: The One Piece Cable system requires a slotted cable guide and cable stop and works best with modern frames using a 245mm cable stop-to-mount distance. Tech Specs - Housing: Coated linear strand - Wire: 1.5mm Pre-stretched slick wire - Length: 50" - Lug: Two-piece bind-free brass - Fits: Frames with 245mm cable stop distance - Weight: 3.0oz

The Kink Linear DX cable features an outer linear strand housing, which decreases bind when the cable twists during tricks. The custom brass lever lug allows the inner wire to twist freely within the brake lever eliminating twist and bind even further. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming. TECH SPECS - Housing: Coated Linear Strand - Wire: 1.5mm Pre-Stretched Slick Wire - Length: 50" - Lug: Two-Piece Bind Free Brass - Weight: 2.0oz

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Small flange for smaller hydraulic loops - 50-pack

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed adjustment for braided shift housing - Not recommended for use with brake systems - Size: 4.5mm

A truly one-size-fits-all solution, the Kink Lower Gyro Cable features three sets of brake cable end lugs that can be trimmed off after the correct cable length is chosen. The dual-cable system fits with all standard 990-style brakes and frames, and fits most popular gyros. The dual-cable stop plate bolts cleanly to existing frame cable stops, for perfect dual-cable routing. TECH SPECS - Size: Universal - Housing: Coated Linear Strand - Wire: 1.5mm Pre-Stretched Slick Wire - Lug: Multi-Length Trimmable Lug System - Weight: 3.4oz

The Kink Upper Gyro cables are a uniquely designed dual cable system and are available in two lengths to work with Kink-specific brake levers or the universal size to fit most other popular brake levers. The two ultra-smooth pre-stretched inner wires are combined into a single, cast lever lug, which brings the smoothness and stiffness of the dual-cable system to traditional brake levers without any protruding parts. TECH SPECS - Housing: Coated linear strand - Wire: 1.5mm pre-stretched slick wire - Lug: Unique, single, cast lever lug - Weight: 2.3oz

- Nano-polished ultra slick extruded cable is non-coated for ultimate smoothness and durability - Double ended for Shimano/SRAM road and MTB brake levers - Pre-stretched for more responsive braking - 1.5mm x 1700mm

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

Alleviate brake cable alignment and tangles with Origin-8's Fork Mount Cable Hanger. Made from forged aluminum, it mounts easily to the hole in your bike's fork crown. - Forged aluminum construction - Mounts to most frame or fork mounting holes - Great for tricky cantilever brake setups - Lightweight design - Front for fork mount / Rear for frame mount

- Great for center-pull cantilever brake setups - Fits threadless fork steerer tubes - Includes barrel adjuster - 24mm cable stop drop - AL6061-T6 alloy construction

Alleviate brake cable alignment and tangles with Origin-8's Rear-Mount Cable Hanger. Made from forged aluminum, it mounts to most brake bridge mounting holes and is great for solving tricky cantilever brake set up problems. - Forged aluminum construction - Mounts to most frame mounting holes - Great for tricky cantilever brake setups - Lightweight design

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Dual Cable - Diameter: 1.5mm

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Fits most - Diameter: 1.5mm

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 7.5 – 9.5-inch - Diameter: 1.5mm

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: Up to 7.5" - Diameter: 1.5mm

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 11 - 12.5" - Diameter: 1.5mm

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

The Kink Linear brake cable features an outer linear strand housing, which greatly decreases bind when the cable twists during tricks. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming. TECH SPECS - Housing: Coated linear strand - Wire: 1.5mm pre-stretched slick wire - Length: 50" - Lug: Traditional cast - Weight: 2.5oz

Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Frame Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

- Stainless steel die-pulled and polished superslick brake cable with electrolysis coating - Electrolysis coating offers an ultra-smooth surface finish that greatly reduces friction for outstanding braking performance - SRAM/Shimano compatible head - Extra-long 2800mm cable length - Use: Front or Rear - Length: 2800mm - Diameter: 1.5mm - Style: Road

Jagwire's Stick-On Cable Guides are made of lightweight aluminum with adhesive on the bottom. The aluminum lets them conform to any shaped frame tube and the adhesive holds fast. They come with Jagwire's C-Clips, nylon cable clips that snap onto the guides to hold the cables neatly in place. You get a pack of 4.

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

In-line cable tension adjusters - Indexed fine-tuning allows you to feel each "click" of adjustment and prevents loosening from vibration - Fits cable housing without ferrules

- Teflon-coated stainless steel inner wire - Includes cable, housing, ferrules, and cable tips - Cable length: 2100mm - Housing length: 1800mm - Use: Front or Rear - Length: 2100mm - Diameter: 1.5mm - Style: BMX/MTB

Housing liner provides an extra line of protection between cables and housing. - Bridges gaps between housing segments

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Compatible with 4mm or 5mm housings

The M2 lever works with a single cable or Odyssey's dual cable system. - Improved braking power for Gyro users - Left/Right hand compatible