Lighting

Recon-E Light to Bosch motor unit connector cable.

A universal quick release mount that attaches to round-shaped drop and flat handlebars.

Recon-E Light to Shimano motor unit connector cable.

Attaches Blackburn Local Lights to any rack.

Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage

Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts

Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g

- Replacement aero mount for Numen light

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

The Bontrager Blendr Saddle Mount makes riding safe easier than ever. All you need are two secure bolts to easily and cleanly attach compatible Bontrager Flare tail lights so you can always be seen when you ride. - Blendr mount allows for integrated rear light attachment - Easily and securely mounts to compatible saddles - Includes mounting hardware (2—3mm M5 bolt) - Torque included M5 mounting hardware to 2Nm

Product details - Compatible with USB rechargeable Flare taillights and all Ion headlights - Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps - Silicone body with a tooled adjustment clamp diameter - When rotated for a Flare, the bracket is angled to compensate for an angled seat tube - 25g

Product details - Easily integrate your Bontrager Flare tail light on your Madone 9 Series - Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp

Key features: - Securely attaches all Ion lights to bars - Reduces vibration and slippage - Compatible with 22.2-31.8mm diameter bars - Mount rotates left and right for optimal placement

Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash

Three bright LEDs with over 270 degrees of weather-resistant visibility. Send the right signal Added visibility. Flare 1 is powered by three ultra-bright LEDs that provide over 75 hours of run time on only two AAA batteries. Batteries included—when else does that ever happen? Product details - Be seen with Bontrager's focused optics and over 270-degree visibility - Three bright white, environmentally-friendly LEDs - Three modes—steady high beam, flashing and random flashing - 80+ hour run time - Includes AAA batteries and a seat post clamp

Topeak's WhiteLite Race's two super-bright LEDs are just what you need to get home safely after the sun goes down. With its steady and blinking modes you're sure to catch the attention of drivers and its included coin batteries are good for up to 140 hours of use! Plus, the WhiteLite Race features a super-simple no-tools rubber strap handlebar mount that works on any bike. Just push the lens to toggle the light's modes!

Charge, Click, Go! Hassle-Free Safety Light Just press the lens and, click, traffic can see you! A silicone mount lets you attach this powerful little light almost anywhere, and the handy LED fuel gauge tells you when it’s time to recharge with its micro-USB cable. No more batteries — just charge, click and go! - Charging Cable Included, No Tools Required - Lithium Polymer Battery - Waterproof To Ip-65 Standard - 3-Hour Recharge Time

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

A light that's always there when you need it. - Three-LED headlight with four flash modes - Visibility range: up to 2,000ft or 600m - Batteries and stainless steel hardware included Specifications: - Battery: AAA (LR03) - Not rechargeable - Dimensions: 77 L x 34 W x 44 H (mm) - Waterproof rating: IPX3 - Weight: 150g

Keeping the light stable and centered on the handlebar, the stem mount allows for a clean, uncluttered handlebar.

Lights, Camera, You Name it The Accessory Mount is a great solution for attaching your GoPro-style mount to your helmet, seatpost, handlebar, selfie-stick or just about anything else. The banded system offers easy attachment, the 270 degree rotation helps you position your camera so that you can get the shot every time, and the omni-directional breakaway feature will take the hit in a crash (possibly saving your camera equipment). With the Accessory Mount, your imagination is the only thing holding you back. Features - Omni-directional breakaway, 270 Degree Rotation

Stay safe at any speed with this innovative back light that gets brighter when you hit the brakes. The Lumasense uses an accelerometer to boost brightness as your speed slows, alerting the traffic behind you. Powered by Chip-On-Board (COB) technology, its 30-lumen beam is housed in a compact, tough nylon case - Responsive brake light - USB rechargeable - 30 lumen COB LED - Tool free, multi position mount - Silicone strap Burn Times: - Full power: 8hrs - Medium power: 9hrs - Flash: 8hrs - Strobe: 9hrs

- Maximum output to 20 lumens - ANSI certified lumens and runtime - IPX4 water resistant - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost, Strive, Lanza, Coveta, Liv Rev Comp and Luta series helmets

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

Safely ride into the night with light sets from Bontrager, all featuring 270 degrees of visibility and steady and flash modes. - Set includes: Glo headlight, Ember taillight and 2 silicone straps - Each set includes lights with focused optics and over 270 degrees of visibility Glo Instantly add safety lighting with the Glo headlight. Used as a stand alone system in twilight conditions, as additional lighting, or as an emergency back-up, these compact, bright and stylish lights can be run in either steady or flashing modes and provide over 40 hours of run time. Elastic bands add versatility. - Be seen with Bontrager's focused optics and over 270 degrees of visibility - One bright white and environmentally-friendly LED - Features steady and strobe-flash modes - Run time of 40+ hours via two 2032 batteries (included) - Includes silicone strap for quick installation on handlebars, seatposts, and more Ember Instantly add a burst of visibility to the rear of your bike with the Ember taillight. Used as a stand alone system in twilight conditions, as additional lighting, or as an emergency back-up, these compact and stylish lights provide key visibility with steady or flashing modes and provide over 40 hours of run time. Ember Multi-Use Lights include two CR2032 batteries and an elastic strap for attachment to a variety of surfaces including helmets. - Be seen with Bontrager's focused optics and over 270 degrees of visibility - Features steady and strobe-flash modes - Run time of 45+ hours via two 2032 batteries (included) - Includes silicone trap for quick installation on handlebars, seatposts, compatible shoes, and more

A beacon in the night The Ion 120 front light comes in an easily mountable compact size yet packs enough punch to light the road or trail in front of you. A powerful 120 Lumen front light, Ion 120 illuminates in three modes: high, low, and flash, and offers 270 degrees of visibility. Batteries and Sync mounting brackets included. - 120 Lumens via high-power, environmentally-friendly, 1W CREE LED - Be seen with focused optics and over 270 degrees of visibility - High, low, and flash modes for versatile lighting options - Sync bracket allows for quick and easy adjustment, mounting, and removal - Includes 3 AAA batteries and Quick Connect bracket - Blendr compatible

With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-65 standard - 3 hour recharge time - 18g / 0.04lb each As Front: - 60 Lumens - Runtime: High 1.5hrs, Flashing 5hrs As Rear: - 20 Lumens - Runtime: High 1.5hrs, Flashing 5hrs

- COB style LED rear safety light in the shape of a heart - Perfect for cruisers, kids bikes or anyone that is feeling the love and desires a little extra flair on their ride - USB rechargeable with integrated low battery indicator Modes: 5 Mount: Rubber Strap Rechargable: USB Lumens: 15 Lumen Range: 1-100

Not too long ago a 550-lumen headlight for this price would have been a pipe dream, but now the Dayblazer 550 is a dream come true! AWESOME LIGHT. AWESOME PRICE. Featuring eye-popping BLITZ Daytime Running Mode to grab the attention of cars, IP-67 submersibility and ample side visibility, the Dayblazer 550 puts light where riders need it most. - Lithium Battery Packaged: In Product - Recharge Type: Micro-USB rechargeable — Charges via any standard USB port (charging cable included) - Number of Batteries: 1.00 - Brightness: Up to 550 lumens - Batteries Included: Batteries Included - Lithium Battery Energy Content Watt Hours: 10.1 - Battery Type: Lithium Ion - Country of Origin: China - Batteries Needed: Yes - Recharge Time: 3-hour recharge - Mounting Options: Swivel mount - A rotating mount allows the light to be adjusted to center on the road! This versatile silicone mount fits handlebars from 22–35mm and can be used to strap to some helmets. Universal Light Mount action-camera-style mount sold separately - Weight: 59 grams Run Time: - Blitz mode: 1 hour at 550 lumens - High mode: 1.5 hours at 275 lumens - Low mode: 5 hours at 75 lumens - Pulse mode: 5.5 hours at 100 lumens - Strobe mode: 12 hours at 65 lumens Water Resistance: - IP-67 submersible - Ingress protection rating, or "IP Rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-67 Standard, which means it is totally protected against dust/grit and fully protected against the effects of immersion between 15cm and 1 meter for 30 minutes.